Scuba Force Black Devil 55 System

Type: BCDs & Wings

Scuba Force Black Devil 55 System

The Scuba Force Black Devil 55 System is a Simple, Streamlined and Balanced System to provide the Perfect Big Doubles and Big Rig CCR's.

With added centre holes to allow CCR hoses to be passes through to add extreme streamlining of equipment.

System Incudes:

  • 1x Scuba Force Black Devil 55 Wing
  • 1x Scuba Force Backplate of choice 
  • 1x Scuba Force Harness of choice


Perfectly styled donut wing.

No air traps, low flow resistance, simple reach from the dump valve and inflator. The Black Devil 55 leaves no wish unfulfilled. Best suited for use with large sets of doubles plus several stages. The ScubaForce Black Devil Donut Wing 55 sets standards in quality and performance.

All components of the ScubaForce Black Devil 55 are made of the highest quality materials. This starts with the textile inner bladder, which is very sturdy and incredibly durable. The outside bladder is made from a ballistic Cordura, which is equally durable and robust. Rounding out the package is a high quality metal K-inflator.

The Black Devil 55 is equipped with all components from the ScubaForce wing series which can be combined perfectly. This applies to all of the wings from the house of ScubaForce. We offer perfect modular system according to individual requirements and needs.

     Harness options of:


    The ScubaForce Tech Harness Black Devil fits the Black Devil line - the DIR conform tech harness. It is kept very simple and provides maximum safety during your dives.

    The complete set contains:

    • 3.6 meter webbing with center hole
    • ScubaForce buckle - stainless steel
    • 6x rubber bands
    • crotch strap with two integrated D-rings (perfect for scooters)
    • 2x D-ring cranked
    • 2x D-ring straight
    • 9x belt stopper



    Convenience and safety are just a few advantages of the ScubaForce Cobra GT Harness Tech. Designed for the needs of ambitious tech divers. With one hand the dual button safety mechanism is simple to use while preventing unintentional release. The ScubaForce Cobra Harness Tech is the ideal and safe design for serious tech divers looking for safety, high load capacity and reliability.

    Cobra buckle:

    • 1 Cobra GT buckle - male fix
    • Made of very strong polymere
    • Patented safety mechanism max. tensile load of 900 kg (6,509 lbs/ft.) 
    • Ideal for salt water use 
    • Offers you an easy entry and exit 
    • Accidental opening is impossible 
    • Installation on left and right side possible 
    • Individual positioning of the height

    Crotch strap:

    • Width: 50 mm (1.969“) 
    • High comfort, soft material 
    • Two integrated D-rings 
    • Excellent hold without equipment hindrance 
    • Two D-rings (e.g. for scooter)


    • Adjustable tapes 
    • The Harness can be adjusted and positioned in few seconds  

    Easy and safe fixing of accessories

    • Two elbowed O-rings in the area of the shoulders 
    • Fixed D-ring on left side 



    The ScubaForce Cobra GT Harness Comfort combines safety aspects and wearing comfort in an unexpected perfection. It is a comfortable and safe companion for all divers who not settle for the „standard”.  

    Cobra GT Buckles:

    • 2 Cobra GT buckles - male adjustable
    • Patented safety mechanism max. tensile load of 900 kg (6,509 lbs/ft.) 
    • Made of very strong polymere
    • Ideal for salt water use
    • Offers you an easy entry and exit
    • Unintentional open up is impossible 

    Crotch strap:

    • Width: 50 mm (1.969")
    • The soft material guarantees a high comfort 
    • Excellent hold without equipment hindrance
    • Two D-rings (e.g. for scooter) 

    Adjustable Shoulders:

    • The Harness can be adjusted and positioned in a few seconds  

    Easy and secured fixing of accessories:

    • Two adjustable elbowed O-rings in the area of the shoulders
    • Two fixed D-rings in the area of the hips each side

    Backplate options of:


    The ScubaForce Black Devil Skeleton Backplate combines design with a maximum of convenience. Its shape is directly inspired by high quality backpacks. 

    It is Powder coated Stainless Steel weighing 2.3kg and a length of 41cm

    Optimized division of forces:

    • Expanded width compared to similar backplates
    • Innovative shape offers an optimized division of forces as well as an improved wearing comfort (also applicable for double tank configurations) 
    • Center of gravity is close to body axis which allows stowage of heavy P-weights



    Optimal positioning of double tanks using the combination of the 3 holes and the lower slot.

    Holes in regularly spaced intervals enable you to fix your Argon-Set or other accessories without any problems. 

    With a weight of 2.3kg and a length of 40cm



    The ScubaForce Standard Aluminum Backplate has a material thickness of 3 mm and a total weight of  0,7 kg. Thanks to its minimal weight it is your ideal companion. It is especially suitable for travelling by plane.

    The hole pattern on the backplate allows you to secure your equipment for the optimal position and security.