SF2 Backmount Stripped+
The SF2 Backmount Stripped+ is a slightly upgraded SF2 Stripped, It comes with all the connections to the unit fitted with Quick Disconnects this make the unit build up and break down even smoother. Also included is all the extras most people buy on top of the stripped unit like the SF2 Lifting Handle, SPG's with hoses, 1st Stage OPV's, 2x 1st Stage Shut Off's, Calibration hose, QD to LPI Adaptor and 3 Litre Cylinders with the Valves.
All you need to add when the unit arrives is 2x 1st Stages, Wing and Backplate! (most use these from their twinset) Its that Simple!!!!
Was the leading mission statement while engineering the SF2.
KEEP IT SIMPLE!
The vision became mission and finally reality. This is evident at first sight: The SF2 is configured very cleanly and simply. Compared to other rebreathers, the SF2 is compact and well-arranged. The reason: All important components are integrated into the carbon fibre tube. Therefore, the SF2 needs significantly less volume compared to other rebreathers. Tests, as well as various certifications, assure a constant level of security while diving. The SF2 is especially suitable for ambitious technical dives. It is available as either a back mount or sidemount rebreather.
As if it were designed from one piece, the SF2 is shaped cleanly and simply. Moreover, the carbon fibre tube gives the SF2 a new, streamlined and high-quality design.
The assembly and disassembly of the SF2 is very simple as the entire tube can be removed and all the internal parts easily reached.
The electronic chamber is located within the head. The adapters of the breathing hoses are mounted at a slight angle on the head. This leads to a perfect positioning of the unit, as well as being, incredibly comfortable.
The scrubber canister is located between the head and midsection. Concerning the midsection, two different requirements of modern rebreathers are combined. First, you can find the bypass (ADV) which provides gas in case of low volume in the system. Second, the adapters of the “Manual Add” are located here.
The electronic chamber is the heart of the SF2. The O2 sensors as well as the Oxygen solenoid and the battery compartment are located here. The O2 sensors are located in a separate chamber to protect them from moisture. The electronic plate is located below the battery compartment. High-quality SMB angle plugs connect the plate with the sensors.
Unique Positioning of Counter Lung
Compared to other rebreathers, the SF2 differs in the unique positioning of the counter lung. Often, the counter lung is positioned on the chest. In contrast, the SF2's counter lung is located in the lower tube. This leads to an ideal diver's position in the water and low resistance.
Manual Adds & Off Board Gas Connector
The “Manual Adds” enable you to add both oxygen and diluent manually. The “Off Board Gas Connector” allows you to add external gas. Hence, the fundamental idea of redundancy while diving is completely secured. Construction-conditioned the entire periphery works while applying “Off Board Gas”.
- Diameter is 180mm
- Height is 600mm
- Lung Volume of 4.3L
- Jaksa Solenoid
- Battery Life of Solenoid of 40 hours on a standard 9V battery
- 3 O2 Sensors
- BM Ready to dive approx 35 KG depending on backplate
- Shearwater Electronics